GuideUpdated

Peptide Testing Labs (2026): Who Signs Vendor COAs, What They Test and How to Verify

Sixteen labs sign most of the certificates on research peptide sites. We compared where each one is, what accreditation it publishes, what a basic panel costs, how to verify a report and which vendors in our directory cite it.

Sixteen labs sign most of the certificates you'll find on research peptide sites, and Freedom Diagnostics Testing, Janoshik and Vanguard Laboratory appear most often. Almost none publish an ISO/IEC 17025 accreditation that clearly covers peptide purity testing. Most do run a public lookup, which is the single most useful check: if the lab's own copy of a report doesn't match the vendor's PDF, stop there.

Notice: Research peptides are sold for in-vitro laboratory research only. They are not FDA-approved, not for human or animal consumption, and this page is not medical advice. It contains no dosing or use guidance.

We don't test products ourselves. Each lab below has its own profile with sources; figures are as published on the labs' sites on October 21, 2026.

The labs at a glance

"Vendors citing" counts the 144 vendors in our directory whose COA pages name the lab.

LabLocationAccreditation shownReport lookupBasic panel (published)Vendors citing
Freedom Diagnostics TestingFranklin, TNNone found (says ISO 9001 compliant)Yes, search code$200 purity + ID28
Janoshik AnalyticalNot publishedNone foundYes, task number + key$215 (BPC-157)16
Vanguard LaboratoryOlympia, WAA2LA 6377.01 (scope didn't list peptide HPLC)Yes$25013
ILS LaboratoriesSan Diego, CANot confirmedYes, access code$20010
Kovera LabsBuffalo Grove, ILNone foundYes, COA ID$2009
MZ BiolabsTucson, AZNone foundNo public lookupNot published7
Ethos AnalyticsPhoenix, AZClaimed, not confirmedYes, sample IDNot published6
BioRegenNot publishedNone foundYes, number + key$1655
BioviridianCollege Station, TX"In progress"Yes, COA number$1504
Accumark LabsAnaheim, CA"Pending"Yes, verification code$2504
Horizon AnalyticalNot publishedNone foundYes, report number$2003
TrustPointe AnalyticsDorr, MINone foundYes, LIMS keyNot published2
ChromateHudson, NHNone foundYes, Verify portal$180 to $420 by compound2
Krause AnalyticalAustin, TXNone foundYes, request formNot on own site1
Harrens LabHayward, CAA2LA 4074.02 (renewal not confirmed)No public lookupNot on own site1
BT LabsWest Palm Beach, FLNone foundNo public lookupNot published1

A few other names appear once or twice in our data (Colmaric, Eagle Analytical, Verum, MDx and others). We haven't profiled them yet.

What accreditation means here

ISO/IEC 17025 is the standard for testing-lab competence. An accreditation body such as A2LA, ANAB or PJLA audits the lab against it and issues a certificate with a scope: the specific tests the lab is accredited to run. Two points matter for peptide COAs:

  • A certificate isn't blanket approval. Vanguard's A2LA scope that we read covered microbiology, trace elements, preservatives and residual solvents, not peptide HPLC purity. Harrens' certificate appears on California's hemp-lab list.
  • "Compliant", "in progress" and "pending" aren't accreditation. Freedom Diagnostics says it's ISO 9001 compliant, a general quality-management standard. Bioviridian and Accumark list 17025 as in progress or pending.

Unaccredited doesn't mean wrong. It means you're relying on the lab's word, so the cross-checks below matter more. More background: HPLC purity explained and purity vs net content.

How to verify any peptide COA

  1. Find the lab's own record. Use the lookup linked in each profile with the code printed on the report. Compare every number, the date and the client name with the vendor's PDF.
  2. Match the lot. The lot or batch on the certificate should match the vial label. A report for a different lot tells you about a different batch.
  3. Check what was tested. Most basic panels cover purity and identity, sometimes quantity. Endotoxin and sterility are add-ons; see endotoxin testing.
  4. Note who the client is. Janoshik and Kovera sell extra copies of a report under a different client name, so one test can appear under several vendors. Finnrick-commissioned reports from Krause, Harrens and BT Labs name Finnrick as the client.
  5. Read the method. Identity by mass spectrometry is stronger than HPLC retention-time matching alone, which ILS and Ethos use on standard panels.

Use our COA checklist and how to read a peptide COA. For Janoshik specifically, see how to verify a Janoshik report.

Vendor-commissioned vs independent testing

Every certificate on a vendor's site was ordered by that vendor, which picks the sample. Independent programs buy products anonymously instead. Finnrick sends samples to Krause Analytical, Harrens Lab, BT Labs, Chromate and others, and publishes results whether they pass or fail. Our vendor testing tracker shows which vendors have that independent data, and Janoshik vs Finnrick explains the difference.

Bottom line

Pick vendors whose COAs name one of these labs, carry a lot number that matches your vial and can be pulled up on the lab's own lookup. Freedom Diagnostics, Janoshik, Vanguard, ILS and Kovera all support that check. MZ Biolabs, Harrens and BT Labs don't run a public lookup, so their reports take an email to confirm. For vendors that meet these standards, see third-party tested peptides and Janoshik-tested peptide vendors.

FAQ

Frequently asked questions

Which lab tests the most research peptides?

On vendor COA pages in our directory, Freedom Diagnostics Testing is cited most often: 28 of 144 vendors named it on October 21, 2026, ahead of Janoshik (16) and Vanguard Laboratory (13). Among Finnrick's partner labs, Krause Analytical had the most published tests.

Are peptide testing labs ISO 17025 accredited?

Few can show it. Of the 16 labs we profiled, only Vanguard Laboratory and Harrens Lab had an A2LA certificate we could see as of October 21, 2026, and neither scope we read clearly listed peptide HPLC purity. Ethos Analytics states a certificate number we couldn't confirm.

How do I verify a peptide COA?

Use the lab's own lookup with the code printed on the report (Janoshik, Freedom Diagnostics, Vanguard, ILS, Kovera, Accumark, Horizon, BioRegen, Bioviridian, Ethos, TrustPointe and Chromate run one), then compare the lab's copy with the vendor's PDF and match the lot to your vial.

How much does third-party peptide testing cost?

A basic purity, identity and quantity panel was listed at $150 to $250 per sample at most labs on October 21, 2026. Endotoxin, sterility and heavy-metal add-ons cost $100 to $290 each.

Does a COA from a known lab prove a vial is safe?

No. A COA covers the sample the client sent, usually purity and identity only. Unless it includes endotoxin and sterility results for your lot, it says nothing about contamination, and the vendor chooses which sample to send.

Related on PeptideChecked

Start hereBest peptide vendors in the USAReconstitution calculatorCOA checklistCoupon codes